Waterjet Cutting Is The Future
Water creates fantastic force if generated properly. Waterjet cutting is able to be used to cut into steel and many other materials. Water is opening new horizons as it is used as an industrial tool. Focusing to a fine point water is how it is used in cutting metal. Through a small nozzle fitted with a small jewel the waterjet cuts water as it is funneled a an extremely high pressure.
Pressurized to ultra high levels and channeled through a tiny orifice water cuts precise contours through almost any material. It essentially turns the water into a laser. It provides all you need for the perfect cut. The ultra high pressure system is the heart of the cutting system. The intense pressure is generated by an intense pump system.
The special plunger reciprocates back and forth powered by up to 210 bar of oil pressure. The oil pressure acts on a large viscid which is up to twenty times larger than the water plunger. 210 bar of oil pressure intensifies the water pressure up to and beyond 4,100 bar of oil pressure. At 4,100 bar the water is compressed the water is compressed by about thirteen percent. New technology has released a pump that delivers up to 6,000 bar of water pressure.
The large shock attenuator which is integrated in the high pressure plumbing system guarantees a steady pressure of water. Flexible tubing is also part of the plumbing system through which water is pumped to the cutting head. A jewel in the cutting head keeps the part from wearing out from the pressure and velocity. The orifice hole is about the size of a human hair.
Can you guess the speed of the water stream… It is three times faster than the speed of sound. This creates a super sonic power stream capable of cutting through steel and other materials. Your water pressure in your home is about 70psi or seventy pounds per square inch. A waterjet has 60,000psi. Water is exiting the nozzle at more than 900 miles per hour.
The waterjet is used to cut foam, rubber, gasket, paper, and even food and other soft materials as these. Garnet an abrasive is added to the water and this allows the waterjet to cut through hard materials like steel, glass, and even titanium.
All metals, stone, glass or fiber reinforced materials can be can be cut very easily. In this process the waterjet accelerates the abrasive and the result is an accurate cut leaving a satin smooth edge. The system assures flaw free cutting into stone, glass, or even into fiber reinforced materials.
Granite tops to foam packing, the water jet is the perfect cutter. The blade will never dull and because there is no heat generated this makes it the perfect industrial cutter for material that will be used on airplanes and other machinery that cannot be exposed to excessive heat. And there is not time spent on pre drilling. The water jet is the cutting tool of the future today. You will be amazed when you see water cut through steel.
Looking to find the best deal on waterjet cutting , then visit www.copeland-gibson.com to find the best tools and service.
